What is amphoteric oxide
Lecture: Structural Chemistry of Oxides
There are very different reasons for motivating a lecture Structural chemistry of oxides call. These include:
- Frequency of oxygen
Oxygen is the most abundant element on the earth's surface. It makes up 23 percent by mass of the atmosphere, 85 percent of the hydrosphere (H.2O) and 46 percent of the lithosphere. In the lithosphere it is in the form of compounds that are solid (structural chemistry!) Under normal conditions.
- Formation of connections with oxygen
Almost all elements (with the exception of the light noble gases) form binary oxides, and most elements even form several different ones. The variety of ternary or quaternary connections is correspondingly greater.
- Physical Properties
The physical properties of the oxides range from gases that are difficult to condense (e.g. CO) to the most heat-resistant materials (e.g. ZrO2). The electrical properties vary from insulators (e.g. MgO) to semiconductors (e.g. NiO) to metallic conductors (e.g. ReO3).
- Technical importance
Solid oxides are of great interest technically as basic materials (e.g. pigments, ceramics, glasses), in the chemical industry (e.g. catalysts), materials technology (hard materials) and electronics (components, magnetics, ferroelectrics, HT superconductors).
- Diverse structural chemistry
The structural chemistry of oxides is characterized by different bond characters, ranging from ionic to covalent to metallic. In addition to crystalline compounds, there are glasses and ceramics (non-crystalline solids). There are examples of stoichiometric and non-stoichiometric compounds. The coordination numbers at oxygen cover a wide range from 1 (e.g. in CO) to 8 (e.g. in Li2O)
For reasons of time, the treatment of many ternary and higher oxides (e.g. silicates) must be avoided. The treatment of binary oxides (chapters 2 and 3) is structured as follows: The elements highlighted in red form predominantly covalent oxides, which are described in chap. 2 - arranged according to main groups - can be considered. With a few exceptions, the oxides of the elements highlighted in blue can be treated according to their composition, see Chap. 3. The elements shown in black form oxides which can be assigned to the field of molecular chemistry and which are gases or liquids under normal conditions, so that their structural chemistry is only of subordinate importance here. In chap. 4, selected non-stoichiometric oxides (crystallographic shear, etc.) are dealt with. In chap. 5 are structure field diagrams using the example of compounds of the composition AB2O4 discussed.
The complete table of contents is available on template 0.
A chemical classification the oxides can, for example, be based on the acid-base properties. A distinction can be made between:
- acidic oxides = most non-metal oxides (e.g. CO2, P4O10, SO3)
- basic oxides = oxides of electropositive elements (e.g. Na2O, Tl2O, La2O3)
- amphoteric oxides = oxides of less electropositive elements (e.g. BeO, Al2O3)
- neutral oxides = no reaction with water (e.g. CO, NO)
- In a period the acidic character increases:
N / A2O < mgo=""><>2O3 <>2 <>4O10 <>3
basic - amphot. - sour - strongly sour
- For an element, the acidity increases with increasing oxidation number:
MnO <>2O3 <>2 <>2O7
- In the main groups, the basicity increases with increasing atomic number:
BeO < mgo="">< cao="">< sro="">< bao="">
The structural chemical classification the oxides can be made according to the components / structural features or the nature of the bond. On the basis of the linking of the MOn-Polyhedra, oxides form a wide variety of structural elements:
- molecular units (e.g. RuO4, Sb4O6)
- Chains (e.g. HgO, SeO2, CrO3)
- Layers (MoO3, PbO, Re2O7)
- Networks (SiO2, typical salts)
- predominantly covalent oxides
In these compounds, the hybridization of the oxygen determines the stereochemistry at the O:
- sp = linear (e.g. [Cl5RuIV-O-RuCl5]4-) (2 double bonds)
- sp2 = angled, ideally 120 (e.g. O3) (1 double bond)
- sp3 = angled, ideal 109 (e.g. H.3O+) (0 double bonds)
- predominantly ionic oxides
consist of O2-Ions and metal cations. As with all salts, the ionic charge and the proportions are the primary structure-determining factors. In concrete terms, this means for oxygen: The ionic radius of the oxide ion O2 with a coordination number (CN) of 6 is approx. 140 pm and is therefore larger than the typical cation radii. Therefore, one very often finds densely packed oxide sublattices with filled octahedral and tetrahedral gaps. In this context, it is extremely helpful to consider the closest packing.
- Oxides with metallic bond components
are only formed with the heavy alkali metals and some transition metals (suboxides). In these compounds there is an ionic and metallic bond character - spatially separated from one another.
- Is Muhammad in heaven or in hell
- Can dissociate acid into acid
- Why is synchronization so important
- What are examples of class 1 weapons
- Is 60 like 40
- Where to buy microgreens in Bangalore
- Which is the best part of Valencia Spain
- Can therapists have mental illness
- How do Ticketmaster and StubHub compare
- How did Vijay Mallaya loot me
- Muskrats are aquatic rats
- Is it worth promoting on Yelp
- Why does Ireland produce so many potatoes
- How quiet you can use a computer fan
- What is a syntax error in Python
- What is the battery life
- They still make plasma televisions
- What is Sufism Why are Sufis good
- How realizable is the SETI program
- What are nice memories
- Is Tirupur a safe city
- Sex makes you happy
- Where is the air conditioning repair center
- What is the best cover from Leonard Cohen